Aluminium table with parallel action arm design which allows quick and accurate cuts. Incorporates a worklight and flexible shaft suitable for use with Draper Multi-Tool accessories. The dust blower keeps the cutting line clear and a dust extraction facility removes unwanted dust when connected to a dust extractor. The worktable tilts from 0-45°. Uses 127mm pin end blades and pin less fretsaw blades in-conjunction with 24433 blade clamp holder (sold separately). Fitted with cable and approved plug.

Ideally suited for the woodworking enthusiast. Fitted with a front locking rip fence, mitre guide and two extension wings. Facilities include rise and fall tilt blade facility, ripping, straight, mitre and compound angle cutting. Dust extraction facility. It can be both bench mounted or fitted to a stand (available separately). Fitted with a cable and approved plug. Supplied with 36T T.C.T. blade and push stick. Display carton.

Maximum depth of cut at 90°   ...   74mm
Maximum depth of cut at 45°   ...   63mm
Blade diameter   ...   250mm (10")
Bore size   ...   30mm
Speed   ...   4700r/min 
Work Area   ...   630 x 710mm
Weight   ...   22kg

 

Dust extractor provided with a high purification cartridge filter designed to sieve down to 5 microns, reducing the amount of harmful dust in the workshop. Manufactured from superior materials to deliver a particularly useful dust extraction machine for fine dust particle producing tools, such as saws or sanders. Supplied with 2M x 100mm diameter hose with connectors and clips, five filter bags, 2M (approx.) cable and approved plug. When a dedicated dust extractor is required this compact and powerful machine delivers.

 

Air flow (100mm dia. hose)   ...   50L/sec
Overall size   ...   Height: 670mm
         ...   Base: 355mm dia.
Capacity   ...   50L
Weight   ...   10kg

 

Ideal for workshop use, with the added benefit off being fitted with large rear wheels, perfect for transporting to and from different work sites. The large extension table can be fitted to the side or the rear of the saw for added flexibility. Supplied with: 40T TCT blade, mitre guide, dust extraction hose. push stick and moulded cable and approved plug.

 

Maximum depth of cut at 90°   ...   85mm
Maximum depth of cut at 45°   ...   46mm
Blade diameter   ...   315mm
Bore size   ...   30mm
Speed   ...   2800r/min 
Work table   ...   800 x 550mm
Work table extension   ...   800 x 400mm
Overall table length (with ext.)   ...   1600mm
Weight   ...   54kg

 

Supplied with mitre gauge, rip fence, push stick and dust extraction outlet. Facilities include a table tilt with 0-45° capacity allowing angled cutting, ripping, mitre and bevel cutting

Maximum cutting height   ...   80mm
Throat depth   ...   200mm
Cutting speed   ...   15M/sec
Blade length   ...   1400mm
Table size   ...   290 x 290mm
Table tilt   ...   0-45°
Weight   ...   17.5kg

Stock No: 13773      Part No: BS200A